2026-05-29T14:30:31+00:00 www.pools.shop https://www.pools.shop/en pools.shop global@pools.shop https://www.pools.shop/en

Rapid & targeted pH reduction
Use as required]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/ph-minus-granules-3 The pH Minus Granules by CF. Group lower the pH level quickly and reliably into the optimal range. This makes it an indispensable baseline product, ensuring your chlorine, algaecides, and flocculants can achieve the best results. An elevated pH level often occurs completely naturally due to the outgassing of fresh top-up water or following intensive chlorine usage. The consequences include burning eyes, limescale deposits on pool walls, and pool chemicals that lose their structural efficacy. This highly soluble granular formula gently corrects this imbalance, protecting your pool equipment and returning the water to its perfect equilibrium. Highlights: Maximises Chemical Efficiency: Optimises the pH level so that all other pool chemicals can work with maximum efficiency. Excellent Equipment Protection: When dosed correctly, it actively prevents calcium-induced turbidity and rough limescale deposits in the pool basin. Excellent Solubility: The fine granules dissolve completely without clumping and distribute rapidly throughout the pool. Application: It is best to apply the treatment in multiple stages, waiting 4 hours between each application. Test the pH level between doses. The ideal pH level should be maintained between 7.0 and 7.6. Completely dissolve the granules inside a bucket of water. With the filtration system running, slowly pour the solution into the pool along the edge—always avoid pouring near any metal fixtures or fittings! An application of 150 g of pH minus granules lowers the pH level of 10 m³ of pool water by approximately 0.2. Pro Tip: Hard water (high in limescale) possesses a higher buffering capacity and will consequently require a larger volume of pH corrector, whereas soft water will require less. Important Note: When preparing the solution in a bucket, always add the water first, then carefully stir in the granules. Never add water to dry chemicals, to prevent dangerous splashing.

For hygienically clean pool water
For initial & shock chlorination]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/organic-chlorine-granules The Organic Chlorine Granules by CF. Group make pool water sanitation incredibly fast and straightforward. Thanks to the integrated chlorine stabiliser, this treatment is highly protected from rapid degradation caused by the sun, remaining active exactly where it is needed most. This makes it the perfect solution to optimally prepare your water for the start of the swimming season or to effortlessly restore hygienic purity after hot summer days and heavy pool usage. Highlights: Simplifies Season Start-Up: Establishes a protective baseline during the initial pool filling to guard against premature chlorine loss. Fast Acting Recovery: Perfectly suited for shock chlorination to eliminate germs rapidly when acute treatment is required. Built-In Stabilizer: Protects the chlorine from burning off too quickly in direct sunlight, ensuring it remains effective for longer. Application: Adjust the pH level to sit between 7.0 and 7.6. Adjust the free chlorine level to sit between 1.0 and 3.0 mg/l. Always pre-dissolve the granules in a plastic container before distributing the solution evenly across the water surface with the filtration system running. For Initial Pool Fillings: Use approx. 80 – 100 g per 10 m³ of pool water. For Continuous Chlorination: Use 50 g per 10 m³ of pool water every 3 days. For Shock Chlorination: Use 80 – 100 g per 10 m³ of pool water. Pro Tips: It is best to add the chlorine in the evening after swimming has finished for the day. Even though stabilised granules contain built-in sun protection, chlorine operates at its highest efficiency and economy overnight when completely free from UV interference. This allows the sanitizer to distribute evenly throughout the calm water, ensuring the pool is perfectly prepped for the next day. Monitor chlorine levels more frequently during periods of high temperatures or heavy bather loads, and adjust the dosage accordingly. Important Note: When preparing the solution in a plastic container, always add the water first, then stir in the granules. Never add water to chemicals, to prevent dangerous splashing.

Continuous long-term disinfection
For weekly use]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/long-acting-chlorine-tablets The Long-Acting Chlorine Tablets by CF. Group are a time-saving baseline treatment that keeps your pool water hygienically clean around the clock. Thanks to a specialised manufacturing press process, the tablet dissolves exceptionally slowly over several days. This ensures precise dosing and a highly uniform release of chlorine, successfully combating bacteria, viruses, and fungi without requiring daily manual chlorination. Highlights: Consistent Long-Term Action: Protects pool water from germs for days on end due to the slow-release formula of the tablet. Effortless Pool Maintenance: Minimizes day-to-day maintenance to a simple, weekly inspection and dosing routine. Prevents Liner Damage: Keeping the chemical contained within a feeder or skimmer completely shields the pool liner from concentrated bleaching and localized discolouration. Application: Adjust the pH level to sit between 7.0 and 7.6. Adjust the free chlorine level to sit between 1.0 and 3.0 mg/l. Every 7 days, place 1 tablet (200 g) per 25 m³ of pool water into the skimmer basket or a floating chemical dispenser. Pro Tips: Monitor chlorine levels more frequently during periods of high temperatures or heavy bather loads, and adjust the dosage accordingly. These slow-release long-lasting chlorine tablets are not suitable for initial pool fillings or shock chlorination! In those instances, use Stabilised Chlorine Granules or Unstabilised Chlorine Granules. Important Note: Never throw the tablet directly into the swimming pool, as this poses an extreme bleaching hazard to the pool liner! Always use a skimmer basket or a floating dispenser.

Rapid & targeted pH increase
Use as required]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/ph-plus-granules-3 The pH Plus Granules by CF. Group raise the pH level quickly and reliably into the optimal range. This makes it an indispensable baseline product, ensuring your chlorine, algaecides, and flocculants can achieve the best results. While a low pH level is less common, it is often caused by acidic rainfall, soft well water, or the intensive use of specific chlorine types. Left unchecked, acidic water leads to burning eyes as well as corrosive damage to pool walls, grout, and pipework. This highly soluble granular formula gently corrects this imbalance, protecting your pool equipment and returning the water to its perfect equilibrium. Highlights: Maximises Chemical Efficiency: Optimises the pH level so that all other pool chemicals can work with maximum efficiency. Superb Equipment Protection: Prevents corrosive water from attacking metal components, pool fixtures, and heating elements. Excellent Solubility: The fine granules dissolve completely without clumping and distribute rapidly throughout the pool. Application: It is best to apply the treatment in multiple stages, waiting 4 hours between each application. Test the pH level between doses. The ideal pH level should be maintained between 7.0 and 7.6. Completely dissolve the granules inside a bucket of water. With the filtration system running, slowly pour the solution into the pool along the edge—always avoid pouring near any metal fixtures or fittings! An application of 100 g of pH plus granules raises the pH level of 10 m³ of pool water by approximately 0.2. Pro Tip: Hard water (high in calcium) possesses a higher buffering capacity and will consequently require a larger volume of pH corrector, whereas soft water will require less. Important Note: When preparing the solution in a bucket, always add the water first, then carefully stir in the granules. Never add water to dry chemicals, to prevent dangerous splashing.

Disinfection, algae protection & flocculation
For weekly continuous dosing]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/multi-purpose-chlorine-tablets-200-g The Multi-Purpose Chlorine Tablets by CF. Group eliminate the daily hassle of pool maintenance by combining three vital treatment steps into a single tablet. These tablets offer a straightforward, all-in-one solution to combat germs, algae formation, and cloudy water. Thanks to a specialized manufacturing press process, the tablet dissolves exceptionally slowly and uniformly over several days to keep your pool water continuously crystal-clear. Highlights: Convenient 3-in-1 Action: Combines reliable long-term sanitation with integrated algae control and a powerful clarifying flocculant. Consistent Protection: Releases active ingredients evenly over several days due to its slow-release formula, eliminating daily dosing guesswork. Protects the Pool Liner: Dissolving safely inside a dispenser shields the pool material from concentrated bleaching and localized discolouration. Application: Adjust the pH level to sit between 7.0 and 7.6. Adjust the free chlorine level to sit between 1.0 and 3.0 mg/l. Every 7 days, place 1 tablet (200 g) per 25 m³ of pool water into the skimmer basket or a floating chemical dispenser. Pro Tips: Monitor chlorine levels more frequently during periods of high temperatures or heavy bather loads, and adjust the dosage accordingly. These multi-functional chlorine tablets are not suitable for initial pool fillings or shock chlorination! In those instances, use Stabilised Chlorine Granules or Unstabilised Chlorine Granules. Important Note: Never throw the tablet directly into the swimming pool, as this poses an extreme bleaching hazard to the pool liner! Always use a skimmer basket or a floating dispenser.

Helps with green pool water
For weekly use or as a shock treatment]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/algaecide The non-foaming Algaecide Alba Super K by CF. Group prevents algae growth to ensure your pool water remains perfectly clean and clear. Since algae form the primary food source and ideal breeding ground for bacteria, this liquid shield provides long-lasting, hygienically flawless water quality. The specially developed, non-foaming formula remains stable even during intense water movement. This makes the treatment ideal for pools with counter-current systems or jet nozzles, protects the filtration equipment, and is proven to save money on expensive sanitizers by blocking initial organic growth. Highlights: Completely Non-Foaming: Prevents frustrating foam build-up on the surface—ideal for active pools, water features, and jet systems. Broad-Spectrum Algaecide: Acts both as a preventative measure and as a direct treatment for acute algae blooms. Cost-Effective: Inhibits algae formation early on, drastically reducing overall chlorine consumption for sanitation. Application: Adjust the pH level to sit between 7.0 and 7.6. Always pour the product slowly into the water along the edge of the pool. Initial Dose (Season Start): Use 150 – 200 ml per 10 m³ of pool water. Weekly Maintenance Dose: Use 100 – 150 ml per 10 m³ of pool water. It is best to apply the treatment in the evening after swimming has finished. Heavy pool use, high temperatures, and rainfall may require a higher dosage. Shock Treatment (Acute Algae): Use 300 – 400 ml per 10 m³ of pool water. Run the filtration system continuously for at least 24 hours, then perform a thorough backwash. Pro Tip: Before the swimming season begins, spray or brush the cleaned, empty pool basin (especially corners, joints, and grouting) with a 20% algaecide solution and allow it to dry completely. This creates a defensive barrier, making it much harder for algae spores to take hold. Important Note: This product is exclusively approved for use in private swimming pools and must never be used in fish ponds, natural bodies of water, or eco-pools.

For sand filter systems only
Continuous dosing in the skimmer]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/flocculant-cartridges-8-x-125-g The Flocculant Cartridges (8 x 125 g) by CF. Group help pool owners with sand filtration systems eliminate microscopic suspended particles and impurities. Through a chemical reaction (flocculation), extremely fine particles such as cosmetic residues or soap films—which would normally pass straight through the filter media—coagulate into larger flakes. These bound particles are reliably trapped within the sand filter and can be easily removed from the system during the next backwash cycle, preventing the pool water from looking cloudy or dull. Highlights: Optimised Filter Clarification: Increases the retention rate of the sand filter to deliver crystal-clear water. Prevents Turbidity: Binds soap residues and organic matter before they can encourage algae growth. Slow-Release Formula: Provides continuous flocculation over approximately 12 hours for maximum efficiency. Broad Compatibility: Can be seamlessly combined with all common sanitation methods, including chlorine and active oxygen. Application: Adjust the pH level to sit between 7.0 and 7.4. Place the cartridge(s) into the skimmer basket immediately following the 2nd or 3rd backwash cycle. Use 1 cartridge per 40 to 50 m³ of pool volume. In cases of severe cloudiness or extreme heat, repeat the treatment after 10 days. Important Note: Only suitable for sand filter systems (do not use with cartridge filters, as this will cause severe clogging). Never throw directly into the pool basin; use exclusively via the skimmer basket.

Disinfection, algae protection & flocculation
Three-weekly continuous dosing]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/multi-purpose-chlorine-block-600-g The Multi-Purpose Chlorine Block by CF. Group reduces pool maintenance efforts by combining three essential water care steps into a single, extra-large block. Thanks to its massive 600 g compressed formula inside a protective plastic dispenser pod, the block dissolves very slowly and uniformly over several weeks to keep your pool water continuously pure, algae-free, and crystal-clear. It is the perfect solution for anyone looking to avoid constant chemical top-ups or seeking a hassle-free pool care strategy during holidays. Highlights: Extreme Long-Term Performance: Reliably supplies your pool water with all essential baseline treatment chemicals for approximately three weeks. Systematic Complete Protection: Combines rigorous continuous sanitation with effective algae control and continuous flocculation. Perfect for Holiday Care: Guarantees stable, pristine pool water even during extended periods of absence. Application: Adjust the pH level to sit between 7.0 and 7.6. Adjust the free chlorine level to sit between 1.0 and 3.0 mg/l. Approximately every 3 weeks, use 1 multi-functional block (600 g) per 25 m³ of pool water. Place the block directly into the skimmer basket with the lid removed. Pro Tips: Monitor chlorine levels more frequently during periods of high temperatures or heavy bather loads, and adjust the dosage accordingly. This multi-functional chlorine block is not suitable for initial pool fillings or shock chlorination! In those instances, use Stabilised Chlorine Granules or Unstabilised Chlorine Granules. Important Note: Never add the block directly into the swimming pool, as this poses an extreme bleaching hazard to the pool liner! Always place it inside the skimmer.

Protects against rapid chlorine breakdown
Use as required]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/chlorine-stabiliser The Chlorine Stabiliser by CF. Group reduces chlorine loss on hot summer days by shielding sensitive chlorine from the sun's destructive UV radiation. Standard unstabilised chlorine is rapidly degraded by sunlight and heat within a very short time—often before it can effectively eliminate germs. This chlorine stabilizer acts like a protective shield, temporarily binding the free chlorine and releasing it in a controlled manner precisely when it is needed for sanitation. As a result, the protective effect in your pool water remains stable for significantly longer, chlorine consumption drops noticeably, and the water stays hygienically clean even during extreme heatwaves. Highlights: Effective Chlorine Protection: Prevents rapid chlorine depletion caused by intense sunlight and high water temperatures. Consistent Protection: Ensures stable sanitation levels and prevents protection gaps in the pool water. Reduces Chemical Costs: Minimizes the overall consumption of chlorine products throughout the swimming season. Application: Adjust the pH level to sit between 7.0 and 7.6. Adjust the free chlorine level to sit between 1.0 and 3.0 mg/l. Slowly scatter the granules directly into the skimmer basket while the filtration system is running. The cyanuric acid (CYA) level should ideally be maintained between 35 and 50 mg/l. Pro Tips: The powder dissolves slowly within the filter bed. Therefore, do not perform a backwash for at least 24 hours after application to prevent the product from being flushed into the waste line completely unused. Monitor the cyanuric acid level regularly with a suitable pool test kit or digital photometer to avoid over-stabilisation (chlorine lock). Important Note: Never broadcast this product directly into the swimming pool water, as this can cause stubborn cloudiness and turbidity.

Continuous dosing or in cases of acute cloudiness
For sand filter systems only]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/liquid-flocculant The Liquid Flocculant by CF. Group has been specially developed to help pool owners with sand filtration systems eliminate stubborn cloudiness and microscopic dirt particles. Through a chemical reaction (flocculation), extremely fine particles such as cosmetic residues or soap films - which would normally pass straight through the filter media - coagulate into larger flakes. These bound particles are reliably trapped within the sand filter and can be easily removed from the system during the next backwash cycle, preventing the pool water from looking cloudy or dull. Highlights: Effective Turbidity Removal: Binds fine suspended particles to make them filterable, delivering crystal-clear water. Prevents Algae Growth: Traps soap residues and organic matter before they can encourage algae blooms. Flexible Application: Suitable for continuous maintenance routines as well as rapid emergency treatment during acute debris buildup. Application for Continuous Dosing: Adjust the pH level to sit between 7.0 and 7.6. Use 5 – 20 ml per 10 m³ of pool water. Feed the solution directly from the original container using an automatic chemical dosing pump. Application for Acute Cloudiness: Adjust the pH level to sit between 7.0 and 7.6. Use 30 – 60 ml per 10 m³ of pool water. Pour slowly directly into the skimmer basket while the filtration system is running. Perform a backwash cycle as required. After approximately 1 day, vacuum away any settled debris using a manual pool vacuum or robotic cleaner. Important Note: This product is exclusively suitable for sand filter systems (do not use with cartridge filters, as this will cause severe clogging of the element fabric).

Rain shower head & additional hand shower
Can be taken apart for easy storage]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/steinbach/solara-solar-shower The Solara solar shower is the perfect choice for those seeking a comfortable and sustainable way to take a shower in the garden or by the pool. By harnessing solar power, it heats water entirely without electricity, providing maximum luxury with its large rainfall shower head and integrated hand spray. A standout feature is the modern, split-design, which makes both transport and seasonal storage incredibly easy. 35-litre aluminium tank: Provides an ample supply of warm water with zero energy costs. Rainfall shower head + hand spray: Offers versatility and convenience for a full outdoor rinse. Mixer tap: Allows for precise, individual temperature control. Practical split design: Ensures effortless transport and space-saving storage during the winter months.

Includes hand shower and stainless steel mounting box
Hot and cold water connection]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/steinbach/balance-outdoor-shower Bring modern design and a refreshing experience to your garden with the Balance outdoor shower. Its sleek, curved profile, crafted from high-quality matte black aluminium, has a sophisticated look that integrates seamlessly into any contemporary outdoor retreat. Equipped with both hot and cold water connections, it allows you to enjoy your ideal water temperature at any time. The integrated hand spray offers added versatility, while the split design ensures the shower can be easily dismantled and stored away after the season. For a secure and stable installation, a matching stainless steel mounting box is included as standard. Dimensions: 53 x 16 x 237 cm Material: Aluminium Max. operating pressure: 5 bar Stainless steel mounting box included Integrated spirit level Storage: Split-design for space-saving winter storage

Rapid & precise pH reduction
Ideal for automatic dosing systems]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/liquid-ph-minus Liquid pH Minus by CF. Group lowers the pH level instantly into the optimal range. This makes it an indispensable baseline product, ensuring your chlorine, algaecides, and flocculants can achieve the best results. An elevated pH level often occurs completely naturally due to the outgassing of fresh top-up water or following intensive chlorine usage. The consequences include burning eyes, limescale deposits on pool walls, and pool chemicals that lose their structural efficacy. This high-performance liquid concentrate gently corrects this imbalance, protecting your pool equipment and returning the water to its perfect equilibrium immediately. Highlights: Maximises Chemical Efficiency: Optimises the pH level so that all other pool chemicals can work with maximum efficiency. Instantaneous Action: As a liquid concentrate, the treatment distributes throughout the pool within seconds, dropping the pH level with zero waiting time. Perfect for Dosing Systems: Ideal for larger commercial-sized containers, allowing for undiluted and fully automated feeding straight from the original drum. Application: Ideally, feed the concentrate undiluted using an automatic chemical dosing system. Alternatively, pre-dilute the concentrate inside a bucket of water and pour it slowly into the pool along the edge—always avoid pouring near any metal fixtures or fittings! Test the pH level regularly. The ideal pH level should be maintained between 7.0 and 7.6. An application of 100 ml of liquid pH minus lowers the pH level of 10 m³ of pool water by approximately 0.1. Pro Tip: Hard water (high in limescale) possesses a higher buffering capacity and will consequently require a larger volume of pH corrector, whereas soft water will require less. Important Note: When manually mixing inside a bucket, always add the water first, then carefully stir in the liquid pH minus—never the other way around!

For use with a dosing pump
For new fills & continuous chlorination]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/liquid-chlorine The Liquid Chlorine by CF. Group, with approx. 12 - 15% active chlorine, solves the problem of unclean pool water by enabling extremely fast and straightforward eradication of germs via automatic dosing systems. This unstabilised liquid concentrate reacts instantly upon contact with water, highly effectively purifying the pool from organic contaminants. This makes it the ideal professional solution for anyone seeking fully automated, precisely controllable, and residue-free sanitation for crystal-clear water. Highlights: Unstabilised Formula: Contains no cyanuric acid (chlorine stabilizer), ensuring the chlorine is immediately 100% active and effective. Fully Automated Compatibility: Ideal for use with automatic dosing pumps, feeding directly from the original container. Application: Ideally, feed the concentrate undiluted using an automatic chemical dosing system. Alternatively, distribute the concentrate undiluted evenly across the water surface while the filtration system is running. Every 2 to 4 days, apply approx. 5 - 10 ml/m³ of pool water until a constant minimum level of 0.3 mg/l of free chlorine is reached at the pool return jets. Pro Tip: Always store the canister in a cool, dark place and use the product promptly, as liquid chlorine naturally loses its potency over time.

For rectangular pools 800 x 400 x 150 cm
Durable & robust material quality]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/rectangular-pool-liner-800-x-400-x-150-cm-sand-1 Give your rectangular pool a fresh new look and enjoy crystal-clear water with a new pool liner. This heavy-duty liner offers a flawless fit, while the thick, robust material guarantees an exceptionally long service life for your pool. If you want to upgrade your swimming pool while ensuring optimal, long-term protection, this precision-tailored liner is the perfect choice. Dive into your beautifully restored paradise and enjoy carefree summer days! Key Benefits & Application: Flawless Fit: Precision-engineered to eliminate unsightly wrinkling and creasing. Premium Comfort: The 0.8 mm material thickness provides a luxurious feel underfoot and enhanced puncture resistance. Seamless Design: Choose the matching tracking bead variation for a clean, professional finish at the pool's edge.

For Intex PureSpa Bubble Greywood]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/display-spa-control-panel-for-purespa-128440-442-version-2021

Prevents hard deposits in the pool
One-off application for winterising]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/winterising-agent The Winterising Agent by CF. Group solves the problem of algae-covered pool walls and stubborn limescale crusts during winter when the filtration system is shut down. Because algae form the perfect breeding ground for bacteria, this specialised formula blocks their growth from the outset while simultaneously protecting the pool surface from scale-induced discolouration. The active ingredients remain stably active in the water throughout the winter months, preventing dirt from bonding to the surfaces. This massively reduces the cleaning effort required the following spring and noticeably lowers the volume of sanitiser needed for the new season start-up. Highlights: Effective Algae Control: Keeps the pool water and walls hygienic and algae-free throughout the winter months. Reliable Scale Inhibitor: Prevents limescale from crystallising, shielding liners and tiles from rough mineral deposits. Effortless Spring Start-Up: Enables quick and easy spring cleaning by preventing dirt from anchoring firmly to the surfaces. Application for Soft to Medium Water (up to 20°dH): Adjust the pH level to sit between 7.0 and 7.6. Lower the water level to approximately 20 cm below the height of the return jets. Use 300 ml per 10 m³ of pool water. Pre-dilute the required amount with 10 times its volume of water. Pour the solution slowly into the pool along the edge of the basin. Application for Hard Water (from 20°dH): Adjust the pH level to sit between 7.0 and 7.6. Lower the water level to approximately 20 cm below the height of the return jets. Use 600 ml per 10 m³ of pool water. Pre-dilute the required amount with 10 times its volume of water. Pour the solution slowly into the pool along the edge of the basin. Pro Tip: Always use an original winter pool cover when winterising your pool. During milder winter periods, a secondary top-up dose of the wintersing fluid is highly recommended. Important Note: This product must not be used in fish ponds. This is not an anti-freeze agent.

For rectangular pools 800 x 400 x 150 cm
Durable & robust material]]>

2026-05-22T22:00:00+00:00 2026-05-22T22:00:00+00:00 https://www.pools.shop/en/cf-group/rectangular-pool-liner-800-x-400-x-150-cm-grey-1 Give your rectangular pool a fresh new look and enjoy crystal-clear water. This heavy-duty liner offers a flawless fit, while the thick and robust material guarantees an exceptionally long service life for your pool. If you want to upgrade your swimming pool while ensuring optimal, long-term protection, this precision-tailored liner is the perfect choice. Dive into your beautifully restored paradise and enjoy carefree summer days! Key Benefits & Application: Flawless Fit: Precision-engineered to eliminate unsightly wrinkling and creasing. Premium Comfort: The 0.8 mm material thickness provides a luxurious feel underfoot and enhanced puncture resistance. Seamless Design: Choose the matching tracking bead variation for a clean, professional finish at the pool's edge.

For Intex hot tubs]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/pressure-release-valve

For Intex hot tubs]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/male-buckle

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/spa-cover-for-128406-128430

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/water-inlet-outlet-connector-nut-navy-blue

For Intex pools]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/inflatable-thermal-cover-1

For Intex PureSpa Bubble Greywood Large]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/cover-for-purespa-graphite-28442

For Intex hot tubs]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/air-pipe

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/air-inlet-connector-nut-for-128430-432

For Intex hot tubs]]>

2026-05-04T22:00:00+00:00 2026-05-04T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/repair-patches

For manufacturer's item number 128450]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/ground-sheet-for-purespa-greystone-deluxe

For Intex hot tubs]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/inflatable-thermal-cover-2

For Intex PureSpa Greystone]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/flow-sensor-on-the-heating-element-for-purespa-greystone

For Intex hot tubs]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/ground-sheet-cloth-for-hot-tubs

For Intex cells]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/o-ring-for-electrolytic-cell

For Intex hot tubs]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/spa-cover-for-28409-28410

For Intex PureSpa Bubble Greywood]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/main-control-board-for-purespa-128440-442-version-2021

For Intex PureSpa Greystone]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/main-control-board-for-128450-128452

For Intex hot tubs]]>

2026-05-04T22:00:00+00:00 2026-05-04T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/water-outlet-cap-in-spa-tub

For Intex PureSpa Greystone]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/water-inlet-pipe-for-purespa-greystone

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/air-pipe-set-for-128430-128432

For Intex hot tubs]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/repair-swatch-for-combo-spa-black

For Intex PureSpa Bubble Greywood]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/water-inlet-tube-for-128440-128442

For Intex hot tubs]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/female-buckle-2

For Intex PureSpa Bubble Greywood]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/air-pipe-set-for-128440-128442

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/control-base-side-cover

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/water-inlet-pipe-for-128430-128432

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/deflation-outlet-cap-28430-432

For Intex hot tubs]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/spa-cover

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/spa-control-panel-fixer-blue

For Intex cell covers]]>

2026-05-07T22:00:00+00:00 2026-05-07T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/o-ring-for-electrolytic-cell-cover

For Intex hot tubs]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/electrolytic-cell-cover

For Intex Pure-Spa Bubble & Jet]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/base-cover-for-128458-128462

For Intex Pure-Spa Bubble & Jet]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/outlet-seal-for-128458-62

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/base-for-128430-32

For Intex PureSpa Bubble Greywood]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/base-for-128440-128442

For Intex PureSpa Bubble Massage Navy Blue]]>

2026-05-05T22:00:00+00:00 2026-05-05T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/spa-control-base-back-for-128430-128432

For Intex PureSpa Greystone]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/air-pipe-set-for-128450-128452

For Intex PureSpa Greystone]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/base-for-purespa-greystone

For Intex PureSpa Greystone]]>

2026-05-06T22:00:00+00:00 2026-05-06T22:00:00+00:00 https://www.pools.shop/en/intex-spare-parts/control-unit-rear-panel-for-128450