BAYROL SpaTime Bromine Care Set

A practical complete set to disinfect your whirlpool or hot tub water with bromine:

SpaTime Bromine tablets, 0.8 kg - safe & effective disinfection

Application:

• Check the bromine level weekly - it should be between 3 & 5 mg/L
• Before adding the bromine tablets, check the pH value & adjust to 7.0 - 7.6
• Add 3 to 4 tablets per m³ to the filter container or any existing dosing device

Important Note:
To avoid bleaching stains, do not add the tablets directly to the hot tub and avoid allowing the tablets to come in direct contact with the surface of the tub.

SpaTime Foam-Ex, 1 L - removes foam that can be caused by residues leftover from body care products.

Application:

• Shake the bottle before use
• Add 10 ml Schaum-Ex per m³ directly into the water

SpaTime pH-Minus, 1.5 kg - lowers the pH value quickly and easily

Application:

• Check the pH value weekly
• Reduce to 7.0 to 7.6 if necessary
• To do this, add 10 g pH-Minus per cubic metre directly into the water while the pump is running to lower the pH value by 0.1

Important Note:
If the water is very hard, it is advisable to check the pH value more than once a week.

SpaTime Crystal Clear, 1 L - prevents cloudy water

Application:

• Check the pH value & adjust it to 7.0 - 7.6
• Activate the circulation pump & add 10 ml per m³ to the water
• Run the filter pump for at least two hours

Important Note:
If the water is still cloudy after 36 hours, it is a sign of organic contamination. This can be removed by increasing the chlorine value.

SpaTime Test Strips 5 functions, 50 pieces - check pH value, chlorine/bromine, active oxygen, alkalinity (TA) and total hardness in seconds

Application:

• Swirl the test strips in the water for 5 seconds
• Remove & do not shake off excess water
• pH & active oxygen value can be determined immediately by colour comparison
• After approx. 10 seconds, the values for chlorine/bromine, alkalinity & total hardness can be determined by colour comparison

Important Note:
Protect test strips from sunlight and moisture. Store the can in a cool, dry place (not above + 30°C) and reseal immediately after removing the test strips. Do not touch the test fields with your fingers. If stored properly, the test strips can be stored until the expiry date printed on them.

Advantages of using bromine:

• Effective against bacteria, viruses and algae, even at higher water temperatures
• Gentle on skin, hair and eyes
• Odour is less intense than chlorine
• Slow release - disinfection effect lasts longer
• Less affected by fluctuations in pH value
• Leaves less residue - the water remains stable for longer
• Easy to dose and use
• Can be easily combined with other water care products