Intex Krystal Clear Sand Filter Pump, 3.7m³
Out of StockNo longer in production.
Krystal Clear Sand Filter Pump, 3.7m³
This sand filter pump has a circulation capacity of 3,700L/h and is therefore suitable for pools with a water volume of up to 18,000L. The 6-way valve enables easy handling and operation of the filter system. The operating pressure can be read off the integrated manometer and the filter cycle can be easily set using the timer on the pump. The mains voltage of the system is 230V and the power is 190W. The tank of the filter system has a diameter of 254mm at the widest point - the required amount of sand is 12kg.
For pools with a standard connection of 32/38 mm, the adapter for Intex pools Ø 32/38 mm x 2 "IG must be used.
Attention: The connection set for Intex pools is not included in the scope of delivery!
- Integrated timer
- No self-priming pump!
- Maximum water temperature: 35°C
- Standard connection for all Intex pools
- Connection Ø 32/38mm possible with a special adapter (not included in delivery)
High-quality filter pump
- High filter performance
- Low energy consumption
- Not self-priming, so the pump must be below the water level
- Prevents the ingress of large dirt particles
- Protects the filter pump
- Reduces the use of pool maintenance products
Integrated timer/continuous operation
This saves you from having to switch the system on and off manually. With the integrated timer, a filter cycle is possible every 24 hours.
The main switch is switched to "ON" and an external timer controls the required cycles
Manometer (pressure control)
- Display of the current operating pressure by manometer
- Complemented by colour scale
GREEN: Filtration given
YELLOW: Filtration available (backwash system recommended)
RED: Filtration no longer available (backwash system immediately)
*Backwashing cleans the filter medium (e.g. quartz sand) and thereby reduces the resistance or pressure, which can be seen on the pressure gauge
Please note that this unit DOES NOT come with a UK plug.
|For a Pool Volume up to:||18,000L|
|TÜV / GS:||Yes|
|Required Amount of Sand:||12kg|
|Recommended Grain Size:||0.7 - 1.2mm|
|Maximum Water Temperature:||35°C|
|Spare parts - Krystal Clear Sand Filter Pump, 3.7m³|
|Numbering sketch||Article no||Designation||Spare parts ►►►|
|2||SB-111721||6-way valve + boiler shell|
|3||SB-111131||Sealing cap 2 "|
|5||SB-111728||O-ring filter vessel|
|6||SB-110712||O-ring sand filter pump|
|7||SB-111729||Middle riser pipe|
|9||SB-111456||Drain valve cover|
|10||SB-111385||Drain valve seal|
|11||SB-111228||L shape seal|
|12||SB-111010||Swimming pool hose|
|14||SB-111723||Transparent sight glass|
|15||SB-111724||O-ring for sight glass|
|16||SB-111726||Bolt for clamping ring|
|17||SB-111727||Screw connection for clamping ring|
|22||SB-110262||Sealing ring gate valve|
|23||SB-110745||Sealing ring gate valve / screw connection|
|25||SB-110255||Flat seal filter connector|
|26||SB-111235||Screw filter connector|
|27||SB-111074||Adjustable pool inlet mouthpieces|
|28||SB-110722||Retracted adapter B|
|30||SB-111071||Pool inlet mouthpiece|
|31||SB-112197||Sieve grid small, from 2016|
|34||SB-111725||Screws for transparent adapter|
|35||SB-110725||Air outlet valve|
|37||SB-112198||Large sieve grille, from 2016|
English reviews written for Intex Krystal Clear Sand Filter Pump, 3.7m³
1 customer review in all languages
We do not have any reviews in English yet, but we do have 1 reviews available in another language.
- No reviews available