Steinbach Pool Professional Superflock Liquid, 1 l

Say goodbye to cloudy pool water with the Superflock Liquid. It binds particles causing turbidity which are then removed by the sand filter system, while also sharpening the filter sand to give you crystal-clear water.

• Binds suspended particles
• Sharpens the sand in the filter system to improve effectiveness
• Not suitable for use with cartridge filter systems

Dosage:
First, adjust the pH to the optimum value of 7.0 - 7.4. Do not add flocculant directly into the pool! Introduce at least 0.15 ml per m³ circulated water via a dosage pump (exact amount depends on the cloudiness of the pool, the amount of use, and the circulation time). To sharpen the sand filter, add 100 - 200 ml per 10 m³ of water via the skimmer while the circulation pump is running. Then immediately turn off the circulation pump for approx. 15 minutes so that a flocculation layer can form. Finally, filter until the water is clear. If the turbidity is still not eliminated, backwash the filter and repeat the process.

Important information:
Please note that this product should only be used according to the product description. It starts to act immediately after use. The dosage specifications only reflect experience and are not binding.

Please store the product in a cool, dry, and frost-protected place, well-ventilated and protected from light. Always transport and store containers upright.

This product is intended for use in private swimming pools only.

Always read the label and product information before use.